| 1932 Ford Hiboy and Full Fendered Chassis |
|
Our Hiboy and full fendered chassis
packages feature new boxed frame rails with threaded body mounting holes,
plates welded inside rails for you to locate, drill and tap your fender
and running board holes. Tubular center crossmember with drop out
transmission mount, motor mounts, front crossmember for transverse leaf
spring (optional I.F.S. available.) Rear coil-over crossmember with 4 bar or ladder bar, panhard, coil-overs, bolts and spacer kit and a cleaned but used 8" Ford rear end. (Optional new 9" available.) Front and rear spreader bars included. All components listed are fitted and
installed, all welding completed, all mounting hardware included. Additional options include chrome, polished aluminum and polished stainless items. Pinched or pinched and shortened front frame horns, 'C' notch for front leaf spring, raised rear crossmember, drum and disc brake upgrades. |
The following prices are in Canadian dollars and includes shipping to your door within CANADA.
| SPINDLES from Total Cost Involved & M.B.M. | |
|
Mustang II |
 |
|
'37 - '41 Ford |
 |
 |
|
| '55 - '57 Chev Popular '55 - '57 Chev spindles with a 2" drop and caliper brackets. '55 - '57 Chev - $265.00 pair |
 |
| Control Arms from Total Cost Involved | |
|
The Total Cost Involved Mustang II tubular control arms come assembled with urethane bushings, cross shafts, ball joints and stabilizer bar mounting point on lower arm. Available in plain steel or polished stainless steel. In stock length or 5/8" shorter. (5/8" shorter arms are recommended for '35 - '40 Ford and similar applications.) Plain Steel
- $610.00 set of four |
 |
|
Super Bell I-Beam Axle |
|
Super Bell I-Beam axles are cast from high strength 65 - 45 -12 ductile iron and accept '37 - '48 Ford passenger car or reproduction spindles. Hiboys 'n' Hotrods stocks 4-inch dropped, 46 inch king pin to king pin width axles with 2 1/4 inch spring perch bosses in plain finish. Plain Steel - $285.00 each Drilled, chrome (pictured) and polished aluminum axles are available at additional cost. |
 |
|
Mustang II Rack & Pinion from Flaming River |
|
|
These reproduction '74 - '78 Mustang II manual
rack and pinion feature high quality aluminum cast ends with two mounting
holes on a 16" center to center and a chrome plated steel center tube.
4.00 turns lock to lock. Racks come complete with rubber mounting
bushings (2) and outer rod ends (2). |
|
 |
|
|
Vega Steering Box from MBM and Flaming River |
|
|
The MBM steering box is a reproduction of the popular Vega
box and is ideal for cars under 2800 lbs. Pitman arms and mounting
brackets are also available. |
|
| EZ Wire Kits | |
|
The EZ 21 Standard pre-wired fuse block will wire your car from headlight's to taillight's. This is a colour coded and labeled kit and features 18 fuses and 21 circuits. It covers all the basics plus all major accessories like A/C, power windows, power door locks, electric fuel pump and backup lights. It also includes horn relay and connector, turn and hazard signals, dimmer switch connector, circuit breaker for headlights, 2 flashers, 1 alternator plug, 2 ignition switch connectors, plus more. EZ Wire Kit - $ 235.00
|
 |
| Power Brake Booster and Cylinder | |
|
The power brake unit features a new 7" single booster and disc/drum C.P.P.
master cylinder (with outlets on both sides of cylinder for easier brake
line routing). Includes hardware as pictured.
Fits all popular pedal and booster mounting brackets. Booster and Cylinder -
$ 165.00 |
 |